vacuubrand PC 500 LAN Instructions For Use Manual

vacuubrand PC 500 LAN Instructions For Use Manual Manual pdf 20 page image

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to checkcarefully the validity of this document with respect to his product. Manual-no.: 999084 / 05/10/2009page 20 of 46VACUULANV. 2.00after 2 secEscSwitch onMenu structure of controllerEscProgram menusee section”Working with thecontroller””Program menus”1013mbarStart ↵↵↵↵↵Start of programwithin2 secwithin2 secDevice menusee next page• Readjustment• RS 232 parameters• Sound• Units of pressure• Auto start• Language• Time delay (not for VACUULAN)• Control (only with RC 5/RC 6)• External error inputFunction menuFunctionCont.pumFunctionpControlEscEsc↵↵↵↵↵Esconly possible in ”vacuum control”Function menu:• Setting of the basic function of the controller (only in ”vacuum control” (pControl)).Device menu:• Setting of the device specific features and the periphery of the controller.- Readjustment: Adjusting the pressure transducer at atmospheric pressure and under vacuum, seesection ”Readjustment”.- RS 232 parameters: Setting of the interface parameters, see section ”Interface parameters”.- Sound: Switching on/off the function ”acoustic warning signal”.- Pressure unit: Selection of the pressure unit mbar, Torr or hPa.- Auto start: Process starts immediately after switching on the controller.- Language: Selection of the language in the menus (English, German, French).- Time delay: Delayed switching off of the cooling water and the pump (not for VACUULAN)- Control: Control of a valve or a pump via the IEC control line (only for RC 5/RC 6).- External error input: In case of failure of the signal the control sends an error message and switches offthe pump, if preset.Attention: When operating a VARIO pump the external error input is used to indi-cate a failure of the frequency converter and can not be wired externally.Program menu:• Setting of the function specific parameters (e. g. preset pressure).Attention: Depending on factory-set configurations some menu options are not active!↵↵↵↵↵Notes on menu structure of the controller