vacuubrand PC 511 NT Instructions For Use Manual

Also see for PC 510 NT: Instructions for use Instructions for use

Contents

vacuubrand PC 511 NT Instructions For Use Manual Manual pdf 48 page image

page 48 of 63Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefullythe validity of this document with respect to his product. Manual-no.: 999188 / 19/05/2009☞ To connect a VMS Module A to a NT pumping unit removethe plug at the lower side of the terminal box of the pump-ing unit and connect pump using the connection cable IECplug- IEC socket to VMS.AccessoriesVMS module A, 100-230 V, 3.5 A, CEE........................................................................................676001VMS module A, 100-230 V, 3.5 A, UK ..........................................................................................676002VMS module A, 100-230 V, 3.5 A, CH ..........................................................................................676003VMS module A, 100-230 V, 3.5 A, US ..........................................................................................676004The 2x5 pole connection cable and the country specific adapter cable (included in the VMS Module Aset) are not necessary for pumping units NT but:VMS adapter cable.......................................................................................................................636655(to connect Vacuum Management System VMS Module A to CVC 3000)Connection cable IEC plug- IEC socket ......................................................................................636466(to connect Vacuum Management System VMS Module A to NT pumping unit)Vacuum gauge head VSK 3000, capacitive Al 2 O3 sensor 1080-0.1 mbar ...................................636657Coolant valve VKW-B, 24 V= .......................................................................................................674220Air admittance valve VBM-B / KF 16 / hose nozzle 6/10 mm, 24 V= ..........................................674217Y-type adapter VACUU•BUS ........................................................................................................636656Extension cable VACUU•BUS, 2m .............................................................................................612552Wall bushing VACUU•BUS ..........................................................................................................636153Cable RS 232C, 9-pole, Sub-D .....................................................................................................637837Level sensor (control of liquid level in catchpots) ...................................................................... 699908Exhaust waste vapour condenser Peltronic .............................................................................699905Silencer (with connection hose)....................................................................................................636588Upgrade kit SYNCHRO to two inlets at PC 510/610 NT .............................................................699920Adapter G 1/4 to PTFE tubing 10/8 mm, for inlet of PC 511/520/611/620 NT .............................677060Small flange KF DN 16 for assembly at inlet of PC 511/520/611/620 NT ..................................662593Seal ring for small flange KF DN 16 (662593)............................................................................3120565Hose nozzle DN 6/10 mm, for inlet at PC 511/520/611/620 NT ..................................................642470Modification kit for small flange KF DN 16, at inlet of PC 510/610 NT .................................699939Hose nozzle DN 6/10 mm, at inlet PC 510/610 NT .....................................................................636635Elbow piece (90°) for PTFE tubing DN 10/8 mm, at inlet of PC 510/610 NT ............................637873Blind flange (C1) for assembly at valve block or distribution head ..............................................677136Flow control diaphragm (C2) for assembly at valve block or distribution head ..........................677137Solenoid operated valve (C3-B) for assembly at valve block or distribution head ......................636668Manometer module(C5) for assembly at valve block or distribution head ...................................677100PTFE tubing DN 10/8 mm (sold by meter) ...................................................................................638644Attention: Dust-laden gases, deposits and condensed solvent vapour can restrict air flow out the si-lencer. The resultant back pressure can lead to damage of pump bearings, diaphragms, and valves.Under those conditions, a silencer must not be used.