walimex PBS-400 Instruction Manual

Contents

walimex PBS-400 Instruction Manual Manual pdf 12 page image

123. Let the device cool down.CAUTION! Danger of burning on the lamp. Let the device cool downfor approx. 30 minutes.4. Screw in lamp:Screw in lamp carefully.WARNING! Danger of electric shock. Always screw in the lamp as toavoid touching in the socket, when the device is switched on.5. Screw out lamp:Screw out lamp carefully and store it securely.6.4 Connect to power supply1. Switch off device.See Switch device on and off.2. Compare the local power supply with the connected load of the device.See Technical specifications.If the values differ, please contact info@foto-walser.de or tel. +49 84 32/ 9489-0.3. Connect the power cord with the socket on the device and with thepower socket.6.5 Charge accumulator of powerpack1. Connect the powerpack with the local power supplyor2. Slide on the accu compartment and remove the accumulator by pullingthe strap.3. Put the accumulator on the charger.4. Connect the charger with the local power supply.5. After charging the accu (approx. 3 hours), take out the accumulatorfrom the charger and insert into the powerpack. Close the accucompartment.