315. Demount and mountprotection capWARNINGPosterior danger of bursting of flash tubeMake sure not to touch the flash tube withbare hands accidentally.Openings for reflector or protection cap1. Mount protection cap:• Remove safety cap from unlocking lever.• Push back unlocking lever and keeppressed.• Turn protection cap anticlockwise as faras it will go and take off from the device.• Release the unlocking lever.2. Mount protection cap:• Let the device cool downWARNINGFire danger through overheating.Danger of burning. Let the device cooldown for approx. 30 minutes.• Push back unlocking lever and keeppressed.• Plug in the protection cap into the threeopenings on the device, turn it clockwiseand listen for the cap to snap into place.• Release the unlocking lever.• Stick the safety cap onto the unlockinglever.6. Mount and demount reflectorWARNINGPosterior danger of bursting of flash tubeMake sure not to touch the flash tube withbare hands accidentally.Openings for reflector and protection cap1. Mount reflector:• Switch off device.See Switch the device on and off.• Let the device cool down.
