National Instruments 9512 C Series manuals
9512 C Series
Table of contents
- What You Need to Get Started
- Related Documentation
- Hardware Installation and Configuration
- Step 2: Connect the NI 9512 to the 37-Pin Terminal Block
- Step 3: Connect the 37-Pin Terminal Block to the +24 V Power Supply
- Step 5: Connect the Drive Enable Signal
- Step 8: Connect the NI PS-12/13 Power Supply to the NI SMD-7611/7612
- Step 9: Connect the SMD-7611/7612 to the Motor
- Step 10: Configure the NI SMD-7611/7612 DIP Switches
- Step 11: Set the Motor Selection Switch
- Step 12: Power on the Drive and Verify Connections
- Software Installation and Configuration
- Step 2: Create a Project in Scan Interface Mode
- Step 3: Add Resources to the Project
- Step 4: Configure the NI 9512 Axis
- Step 5: Enable and Test the Drive Using LabVIEW
- Worldwide Support and Services
Related products
9501 C SeriesC SeriesNI 9503 C SeriesR Series60 SeriesSCC SeriesSCXI SeriesMXI Series60 E SeriesNI R SeriesNational Instruments categories
I/O Systems
Control Unit
Computer Hardware
Controller
Measuring Instruments
PCI Card
Data Loggers
Network Hardware
Test Equipment
Recording Equipment
manualsdatabase
Your AI-powered manual search engine