Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Dürkopp Adler 967 manuals

967 first page preview

967

Brand: Dürkopp Adler | Category: Sewing Machine
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. About these service instructions
  4. Other documents
  5. Safety
  6. Signal words and symbols used in warnings
  7. Working basis
  8. Removing the covers
  9. Removing and fitting the arm cover
  10. Removing and fitting the head cover
  11. Removing and installing the handwheel and drive belt cover
  12. Removing and installing the hook compartment cover
  13. Removing and installing the throat plate
  14. Removing and installing the feed dog
  15. Flats on shafts
  16. Axial play for shafts running in plain bearings
  17. Locking the sewing machine in place
  18. Putting the handwheel into position
  19. Positioning the arm shaft
  20. Setting the handwheel scale
  21. Setting the drive
  22. Adjusting the drive pulley
  23. Adjusting the belt tension
  24. Adjusting the positioning of the machine
  25. Adjusting the reference position of the handwheel
  26. Setting the stitch length adjusting wheels
  27. Setting the lower stitch length adjusting wheel
  28. Setting the stitch length limit
  29. Setting the feed dog
  30. Moving the feed dog
  31. Adjusting the feed dog movement
  32. Setting the feed dog height at top dead center
  33. Adjusting the stroke movement
  34. Aligning the needle bar linkage
  35. Aligning the needle bar linkage in the sewing direction
  36. Position of the hook and needle
  37. Setting the loop stroke position
  38. Setting the hook clearance
  39. Adjusting the loop former
  40. Setting the needle bar height
  41. Adjusting the sewing foot feed
  42. Adjusting the drive dog for the presser foot bar
  43. Aligning the feed stroke of the feet
  44. Setting the stroke movement for the feeding foot
  45. Adjusting the foot stroke
  46. Adjusting the thread system
  47. Setting the winder
  48. Adjusting the hook-thread guide
  49. Adjusting the thread cut-off
  50. Basic setting of the thread cutter
  51. Adjust the position of the movable knife
  52. Adjusting the lateral position of the movable knife
  53. Adjusting the cutting pressure of the knife
  54. Adjusting the hook thread clamp
  55. Soft start
  56. Maintenance
Related products
867767 -1767G767947001911001550-867527i-947524i-911524i-947
Dürkopp Adler categories
Sewing Machine
Industrial Equipment
Controller
More Dürkopp Adler categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine