Samsung AM006JNGDCH/AA manuals
AM006JNGDCH/AA
Table of contents
- indoor unit
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Precautions
- Precautions for Handling Refrigerant for Air Conditioner
- Product Specifications
- Accessory and Option Specifications
- Disassembly and Reassembly
- Indoor Unit
- BIG DUCT
- Global 4way Cassette type
- Duct type(Slim1,2)
- Duct type(Slim3)
- Duct type (MSP1)
- Duct type (MSP2, HSP SMALL)
- Duct type (MA1-Drain Pump Built-in)
- Duct type (MA2)
- AM036/048JNCDCH/AA
- CEILING
- Wall mounted type (Neo forte)
- Wall Mounted type (Boracay)
- Global Mini 4way
- AM145FNPDBH1
- AM290FNPDBH1
- Floor Standing Type (CONCEALED)
- Floor Standing Type (EXPOSED)
- OAP Duct type
- Global Duct 1 (AM007/009/012/015/018MNMDCH/AA)
- Global Duct 2,3 (AM024/027/030/036/048MNMDCH/AA)
- Troubleshooting
- Special Operation
- vacuum operation
- setting an indoor unit address and installation option
- option items
- What to check before diagnosis
- duct type
- ceiling type
- Number Display Method (Outdoor Unit, MCU, Cable remote control, wall-mount, etc.)
- Appropriate Measures for Different Symptom
- Main PCB has no power phenomenon
- Indoor Unit ROOM sensor Error (Open/Short)
- Indoor unit EVAP IN sensor Error (Open/Short)
- Indoor EVAP OUT sensor Error (Open/Short)
- Indoor Heat Exchanger's EVAP IN sensor dislocation error
- Indoor Heat Exchanger's EVA OUT sensor dislocation error (Open/Short)
- Simultaneous Indoor Heat Exchanger's EVA IN, OUT sensor dislocation error (Open/Short)
- Electronic Expansion Valve opening malfunction (2nd stage) -
- Detection of Floating Switch of Indoor Unit's Drain Pump
- The operational error of Indoor Unit's Fan Motor
- Mixed operation Error (Only applicable to Heat Pump Model/Not to HR model)
- EEPROM error
- Option error of the Remote Controller for an Indoor Unit
- Error due to incorrect Indoor Unit Power/Communication Cable Connection
- SPI Feedback Error
- Outdoor Unit Pipe Inspection Error
- Communication Error between Indoor and Outdoor Units during Tracking
- Communication Error between Indoor and Outdoor Units after Tracking
- Communication error between main and sub Unit of outdoor unit or between outdoor units
- Communication Error between MCU and Outdoor Unit
- Internal Communication error of the Outdoor Unit C-Box
- Internal PCB Communication error of the Outdoor Unit C-Box
- Communication Error between MCU and Outdoor Unit after Tracking is Completed
- MCU branch part setup error – inconsecutive connection with the use of 2 branch parts
- MCU branch part setup error – Repeated setup for the same address over 3 times
- MCU branch part setup error – non-installed address setup
- Setup Error for MCU Branch part – Setup Error for MCU Quantity Used
- MCU branch part setup error – Overlapping Indoor unit Address setup
- MCU branch part setup error – Set as being used without connection to an Indoor unit
- MCU branch part setup error – Connect an Indoor unit to a branch part not being used
- MCU branch part setup error – Connect more Indoor units than what is actually set up in MCU
- Outdoor Temperature Sensor Error
- Outdoor Temperature dislocation error
- Cond Out Temperature Sensor Error (Open/Short)
- Outdoor Cond Out sensor breakaway error
- Digital Compressor Discharge Temperature Sensor Error (OPEN/SHORT)
- Constant Rate Compressor Discharge Temperature Sensor Error (OPEN/SHORT)
- Compressor Discharge or Top 1/2 Temperature sensor error
- Dislocation error of Compressor SUMP Temperature (oil temperature) Sensor
- Suction Temperature sensor breakaway error
- SUMP Temperature Sensor Error (OPEN/SHORT)
- High Pressure sensor error (Open/Short)
- Low Pressure sensor error (Open/Short)
- Suction Temperature sensor error (Open/Short)
- Liquid Pipe Temperature sensor error (Open/Short)
- EVI In Temperature sensor error (Open/Short)
- EVI Out Temperature sensor error (Open/Short)
- Suction-2 Temperature Sensor Error (OPEN/SHORT)
- Comp. Down due to High Pressure Protection Control
- Comp. Down due to Low Pressure Protection Control
- Sump Sensor Error Due to Protection Control
- Comp. Down due to Compressor Discharge Temperature sensor
- phase Input Wiring error
- Comp. Down by Compression Ratio Control
- EVI EEV Open error
- Refrigerant Leakage Error
- Prohibition of the operation of Compressor due to Ooutdoor Temperature
- High Pressure Standard Not Met before Air Conditioning (Inability to Re-operate)
- CCH Malfunction and Sump Sensor Miswiring Error
- Fan starting error
- Fan lock error
- Momentary Blackout error
- Outdoor Fan Motor overheating
- Outdoor Unit Fan Motor RPM Error
- Fan IPM Overheat error
- Over-Voltage Error of an Outdoor Fan Motor
- Compressor Excess Current Error
- Compressor starting error
- Inverter Overcurrent error
- Overvoltage / Low voltage error
- DC Link voltage sensor error
- Liquid Compression Prevention Control
- Fan Motor Overcurrent error
- Input / Output Current sensor error
- Outdoor Fan PCB Overvoltage / Low voltage error
- Hall IC(Fan) error
- Inverter Overheat error
- Model mismatching of Indoor unit
- Breakdown of an EEV closure
- PCB Diagram and Parts List
- way cassette , mini 4way casette type
- Duct type (SLIM Duct 1,2)
- Duct type (Slim Duct 3, MA-1(Drain Pump Built-in)
- Duct type (MSP, HSP Small, BIG Duct, MA-2(Drain Pump Built-in)
- Celing type
- Big Ceiling
- Wall-Mounted type (Neo Forte)
- Wall-Mounted type (Boracay)
- Floor Stand Type
- OAP DUCT (AM✳✳✳JNESCH/AA)
- Global Duct -1,2 (AM007/009/012/015/018/024/027/030MNMDCH/AA)
- Global Duct -3 (AM036/048MNMDCH/AA)
- Wiring Diagram
- Slim 1way cassette type
- Big Ceiling (AM036/048JNCDCH/AA)
- RAC(Neo Forte)
- DUCT type (Slim Duct 3, MA-1(Drain Pump Built-in))
- DUCT type (Slim Duct 1,2, MSP)
- DUCT type (HSP Small , MA-2(Drain Pump Built-in))
- Global Duct (AM007/009/012/015/018/024/027/030MNMDCH/AA)
- Global Duct (AM036/048MNMDCH/AA)
- Reference Sheet
- Panel
- Pump-down Method
- How to Put Refrigerant in Refrigerant Container
manualsdatabase
Your AI-powered manual search engine