IBM Aptiva 2158 manuals
Aptiva 2158
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- safety information
- laser compliance statement
- General Information
- Introduction
- Memory
- Hard Disk Drive
- Modem
- Mouse
- CMOS Reset
- Power-On Password
- Flash (BIOS) Update Procedure
- BIOS-contained Model Number and Serial Number
- BIOS Setup Utility
- Viewing System Information, Video Information and Model Information
- Disk Drives
- Input/Output Ports
- Power Management
- Startup Options
- Advanced Options
- Specifications
- Electrical input
- Check Procedures
- Start
- Index of Symptoms, Messages, Error Codes, or Beeps
- Troubleshooting
- Factory-Installed Modem Card
- Audio (Not Supported by Diagnostics Program)
- CD/DVD-ROM Drive
- Keyboard
- Power Supply
- Monitor
- Undetermined Problems
- Diagnostic Aids
- Power-On Self Test
- Diagnostic Diskette
- Diagnostics Program Features
- Repair Information
- Removals and Replacements
- Identifying the Parts of the System Unit
- Cover
- Bay Panels
- Bay 1- 5.25-In. Bay (Internal or External Access)
- Bay 2 - 5.25-In. Bay (Internal or External Access)
- Bay 3 - 3.5-In. Bay (Internal or External Access)
- Adapter Cards
- Memory(DIMM)
- amd-k6 processor (for)
- Pentium II Processor Module (for 2163)
- celeron processor module (for)
- System Backup Battery
- Indicator LED and Cable
- System Board
- Handling ESD-Sensitive Parts
- Software Recovery Procedure
- Parts/Test Point Locations
- Machine Type 2158 System Board Jumpers and Connectors
- Machine Type 2163 System Board Jumpers and Connectors
- Power Supply Connectors and Voltages
- Factory-Installed Modem Card Layout
- In. Hard Disk Drive Jumper Settings
- CD-ROM Drive
- CD-ROM Drive Rear Panel Connectors and Jumpers
- DVD-ROM Drive
- DVD-ROM Drive Rear Panel Connectors and Jumpers
- DIMM Configurations
- System Board Connector Pin Signals
- Mouse Port Signals
- IDE Cable Connector Signals
- Safety Inspection Guide
- General Guidelines
- Parts Catalog
- Abbreviations
- Assembly 1: Machine Type 2158/2163 System Unit
- Assembly 2: Machine Type 2158/2163 Diskette, Hard Drive
- Assembly 3: Machine Type 2158/2163 CD/DVD-ROM Drive
- Assembly 4: Machine Type 2158/2163 Monitor and Power Cord
- Assembly 5: Machine Type 2158/2163 Keyboard and Mouse
- Assembly 6: Machine Type 2158/2163 Zip Drive and Network Adapter
- Assembly 7: Machine Type 2158/2163 Software
- Appendix B. Online Support Information
- Appendix C. Model/Monitor Configurations and FRU Part Numbers
- Index
manualsdatabase
Your AI-powered manual search engine