Taylor-Dunn B0-254-48AC manuals
B0-254-48AC
Table of contents
- Table Of Contents
- Introduction
- who should read this manual
- Safety Rules and Operating Instructions
- how to identify your vehicle
- taking delivery of your vehicle
- safety rules and guidelines
- periodic maintenance checklist
- General Maintenance
- troubleshooting guide
- lubrication chart
- Front Axle Service
- adjust front wheel bearings
- front axle removal and installation
- Steering Component Service
- front axle disassembly
- replace front wheel bearings
- replace the king pins and bushings
- replace the steering knuckle
- front end alignment
- inspect ball joints
- inspect rod ends
- adjust the steering gear
- replace the steering shaft
- replace the steering wheel
- replace the steering gear
- center the steering gear
- repair the steering gear
- Brakes Service
- inspect the service brake
- adjust the service brakes
- check master cylinder fluid
- bleed the brake system
- flush the brake system
- replace front disc brake pads
- replace rear brake pads
- replace the wheel cylinder
- replace the master cylinder
- repair the master cylinder
- check oil level
- change oil
- rear hub or rotor
- removing and installing the rear axles
- transmission assembly
- disassembling the 3rd member
- assembling the 3rd member
- pinion gear shimming instructions
- Suspension
- replace the rear springs
- replace the front springs
- Tires and Wheels
- tire inflation
- Battery Service
- storage and returning to service
- status led code table
- Wire diagram
- front suspension
- rear suspension
- rear axle
- front brake
- brake lines
- wheels and tires
- Brake Lining Handling Precautions
- hardware identification
- hex nuts
manualsdatabase
Your AI-powered manual search engine