National Instruments C Series manuals
C Series
Table of contents
- Getting Started with NI
- Software
- Hardware Installation and Configuration
- Step 1: Set Up the Real Time System
- Step 3: Mount the Drive and Connect the Protective Earth
- Step 6: Connect the Motor and Encoder to the Drive
- Step 8: Connect the Drive Communication
- Step 9: Confirm Drive Connections
- Step 2: Creating a Project and Adding NI RT Controller
- B. EtherCAT Master and NI 9144 EtherCAT Expansion Chassis
- C. NI 9146/7/8/9 Ethernet RIO Expansion Chassis
- Step 4: Configure the NI 9514 or NI 9516 C Series Modules
- Step 5: Install AKD WorkBench and Configure the Drive
- Step 6: Enable and Test the Drive using LabVIEW
- Tips and Troubleshooting
- Using an EtherCAT AKD Drive in Analog Mode
- Connecting to the PC Using a Static IP
Related products
9512 C Series9501 C SeriesR Series60 SeriesSCC SeriesSCXI SeriesMXI SeriesNI 9503 C Series60 E SeriesNI R SeriesNational Instruments categories
I/O Systems
Control Unit
Computer Hardware
Controller
Measuring Instruments
PCI Card
Data Loggers
Network Hardware
Test Equipment
Recording Equipment
manualsdatabase
Your AI-powered manual search engine