Desmi CC manuals
CC
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- GENERAL INFORMATION
- TECHNOLOGY A/S can supply pump units within potentially explosive environments
- Figure 2:Shows the liquid flow through the ROTAN pump – seen from the front end
- Figure 4:: A list of the various pump types, their designation and application
- Figure 5: A list of pump sizes based on the internal diameter of the pump's inlet/outlet in inches and millimetres
- Figure 7:A list of the various pump sizes and pump types supplied with an internal thread
- EC DECLARATION OF CONFORMITY
- SAFETY WARNINGS – IN GENERAL
- SAFETY WARNINGS – ELECTRICITY
- PUMP MODELS
- P UMP MODELS
- P UMP VERSIONS
- TRANSPORTING THE PUMP
- Figure 9:Table showing the weight in kg of the various pump types in the various pump sizes
- Figure 10:Lifting instructions for pump with free shaft end with flange. (Not applicable for HD202
- STORAGE, LONG-TERM PRESERVATION AND FROST PROTECTION OF THE PUMP
- F ROST PROTECTION
- C ONNECTING THE MOTOR AND THE PUMP
- A XIAL CLEARANCE
- Horizontal positioning of the pump
- Vertical positioning of the pump
- P OSITIONING OF THE PUMP ON FOUNDATION
- B EFORE CONNECTING THE PIPES
- Figure 21:The maximum permitted external forces and torque that may be applied to pump flanges for the various pump sizes
- Flange coupling
- Threaded coupling
- T HERMAL SENSOR
- E MERGENCY STOP
- E LECTRICAL COUPLING
- BEFORE STARTING THE PUMP
- B EFORE STARTING AFTER PRESERVATION
- AFTER STARTING THE PUMP
- R UNNING IN THE SOFT SHAFT SEAL – WHEN STARTING THE PUMP
- BYPASS VALVE
- Figure 24:A double-action bypass valve
- V ALVE CONFIGURATIONS
- O PERATING PRINCIPLE – VALVE
- S ETTING THE BY - PASS VALVE
- Figure 28:The setting value "A" for ROTAN valves
- Figure 29:Setting value "A" in mm, based on the valve number or on pump type/pump size and the valve's operating pressure in bar
- PUMP LIQUIDS
- Figure 31:The pump liquid's maximum permitted temperature for the various pump types
- Food
- STORING THE USER MANUAL
- Figure 34:The figure shows which parts or what must be checked and maintained on the pump, and at what intervals this must be undertaken
- A DJUSTING THE SOFT SHAFT SEAL
- Repacking – soft shaft seal
- B ALL /R OLLER BEARINGS
- grams for the pump types and sizes indicated
- Service life – ball/roller bearings
- Figure 38:Ball/Roller bearing types and the minimum service life in hours for the various pump types and sizes
- L UBRICATION OF SLIDE BEARINGS
- Figure 40:Re-lubrication intervals and amounts of grease in grams for lubrication of slide bearings – main bearing and idler bearing
- TROUBLESHOOTING
- EMPTYING AND CLEANING THE PUMP
- DISPOSAL OF LIQUID
- REPAIRS
- C HECKING THE AXIAL CLEARANCE
- Setting the axial clearance
- Figure 45: The size of the angle for a single surface on the hexagonal bolt head on the adjusting screws
- Figure 47:The procedure for setting the axial clearance in the various pumps for installed and non-installed pumps respectively
- Figure 48:The procedure for setting the axial clearance on installed and non-installed HD202 pumps
- SPARE PARTS
- S PARE PARTS DRAWINGS
- SPARE PART LIST
- TECHNICAL SPECIFICATIONS
- O PERATIONAL PRESSURE
- T EMPERATURE
- I NSTALLATION OF THE PT100 SENSOR
- ED Pumps
- SUBSIDIARY COMPANIES – DESMI PUMPING TECHNOLOGY A/S
manualsdatabase
Your AI-powered manual search engine