Barco DP2K-E series manuals
DP2K-E series
Table of contents
DP2K-E series
Table of contents
- software license agreement
- Table Of Contents
- Table Of Contents
- Welcome
- About this manual
- Safety
- General considerations
- Important safety instructions
- Product safety labels
- Light beam Hazard Distance (HD)
- HD in function of the lens Throw Ratio (TR)
- Getting started
- Installation requirements
- Unpacking the projector
- Initial inspection
- Installation process
- Installation process overview
- Physical installation
- Positioning the DP2K-E series projector at port window
- projector tilting
- Connecting the projector with the power net
- Connecting a UPS to the projector electronics
- Lenses & Lens selection
- Available lenses
- Lens selection
- Lens installation
- Lens removal
- Lens shift, zoom & focus
- Input & Communication
- Introduction
- Local Keypad
- Projector Status
- Cinema Controller
- ICMP
- ICMP introduction
- ICMP HDD
- ICMP communication ports
- ICMP source input ports
- ICMP reset button and status LEDs
- ICMP HDD status LEDs
- ICMP device certificate
- ICMP configuration via Communicator
- Obtaining the Barco ICMP certificate
- Removing a HDD form the ICMP
- Installing a HDD into the ICMP
- Communicator Touch Panel
- Installing the Touch Panel interface
- Repositioning the Touch Panel interface
- Starting up
- Switching the DP2K-E series projector ON
- Switching the DP2K-E series projector OFF
- Scheimpflug
- Scheimpflug introduction
- Scheimpflug adjustment
- Fixation of the Lens Holder front plate
- Back Focal Length adjustment
- Convergence
- Convergence controls
- Preparing for convergence adjustment
- Converging the blue pattern onto the red pattern
- Converging the green pattern onto the red pattern
- Closing off the Light Processor compartment
- Lamp House
- Removal of the Lamp Module
- Installation of the Lamp House
- Resetting the lamp parameters
- Preventative maintenance actions
- month maintenance actions
- Maintenance procedures
- Check the dust filters
- Vacuum cleaning of the dust filters
- Washing and drying the dust filters
- Cleaning the lens
- Cleaning the exterior of the projector
- Authorization to clear security warning on the projector
- Removal and installation of the projector covers
- Removal of the front cover
- Removal of the rear cover
- Removal of the top cover
- Removal of the left side cover
- Removal of the right side cover
- Removal of the top cover plate of the Light Processor compartment
- Removal of the side cover plate of the Light Processor compartment
- Installation of the side cover plate of the Light Processor compartment
- Installation of the top cover plate of the Light Processor compartment
- Installation of the right side cover
- Installation of the left side cover
- Installation of the top cover
- Installation of the rear cover
- Installation of the front cover
- Specifications
- Specifications of the DP2K-6E
- specifications
- Specifications of the ICMP
- Dimensions of the DP2K-E series projector
- Dimensions of the universal pedestal
- Technical Regulations
- Pin configurations
- About General Purpose Inputs & Outputs (GPIO)
- Pin configurations of the Cinema Controller communication ports
- Pin configurations of the ICMP communication ports
- Environmental information
- Disposal information
- RoHS compliance
- Hazards
- Production address
- Importers contact information
Related products
DP2K SeriesDP2K S-seriesDP2K-S SeriesDP2K-C SeriesDP2K SLP SeriesDP2K CLP seriesDP4K-L SeriesDP K-P SeriesELM SeriesDP K-19B SeriesBarco categories
Projector
Monitor
Projector Accessories
Controller
Computer Hardware
Medical Equipment
Media Converter
Conference System
PCI Card
Avionics Display
manualsdatabase
Your AI-powered manual search engine