Panasonic S-09MM2U6 manuals
S-09MM2U6
Table of contents
- installation instructions
- IMPORTANT
- Check of Density Limit
- Precautions for Installation Using New Refrigerant
- New refrigerant R410A cannot be used for earlier models
- Table Of Contents
- GENERAL
- 1-5. Tubing Length
- 1-6. Tubing Size
- 1-7. Straight Equivalent Length of Joints
- 1-9. System Limitations
- 1-10. Installation Standards
- 1-12. Installing Distribution Joint
- 1-13. Optional Distribution Joint Kits
- 1-14. Optional Solenoid Valve Kit
- 1-15. Example of Tubing Size Selection and
- Refrigerant Charge Amount
- SELECTING THE INSTALLATION SITE
- 2-2. Shield for Horizontal Exhaust Discharge
- 2-5. Dimensions of Wind Ducting
- 2-6. Dimensions of Snow Ducting
- HOW TO INSTALL THE OUTDOOR UNIT
- 3-3. Routing the Tubing
- 3-4. Prepare the Tubing
- ELECTRICAL WIRING
- 4-2. Recommended Wire Length and Wire
- HOW TO PROCESS TUBING
- 5-2. Connecting Tubing Between Indoor and
- Outdoor Units
- AIR PURGING
- TEST RUN
- test run procedure
- auto address setting
S-09MM2U6
Table of contents
S-09MM2U6
Table of contents
- installation instructions
- IMPORTANT
- check of density limit
- Table Of Contents
- GENERAL
- SELECTING THE INSTALLATION SITE
- HOW TO INSTALL THE INDOOR UNIT
- 3-2. Preparations Before Installation
- 3-4. Installing the Duct
- 3-6. Installing the Drain Pipe
- 3-7. Checking the Drainage
- ELECTRICAL WIRING
- 4-2. Recommended Wire Length and Wire
- HOW TO PROCESS TUBING
- 5-2. Connecting Tubing Between Indoor and Outdoor
- 5-4. Taping the Tubes
- PRECAUTIONS ON TEST RUN
- EXTERNAL STATIC PRESSURE SETTING
- 9-2. Operating the Timer Remote Controller (CZ
- 9-3. Operating the High-spec Wired Remote
- APPENDIX
manualsdatabase
Your AI-powered manual search engine