3Com 3C17539 Installation Manual

Also see for Switch 8810: Product guide Datasheet Product guide Configuration guide Command reference guide

Contents

Powering and Booting the Switch 77■ All the system LEDs on the fabrics function normal.Boot Interface The Switch 8807 is used as an example in this section.The following is the information that will be output at the Console terminal whenyou power on the switch.ZBB_TESTStarting...******************************************* ** 3Com Switch 8800 Family Bootrom, Version 106 ** *******************************************Copyright(C) 2001-2005 by 3Com CORPORATIONCreation date: Jun 6 2003, 19:28:01CPU type : MPC755CPU L2 Cache : 1024KBCPU Clock Speed : 400MHzBUS Clock Speed : 100MHzMemory Size : 512MBFlash file system init....doneSwitch 8800 Family 3C17508 board self testing.....................The board is steadySlotNo of this 3C17508 is 0BootRom main system CRC check is OK82559 register testing is OKEPLD1 testing is OKEPLD2 testing is OK16c2552 register testing is OKPlease check LEDs......................LED testing finishedThe switch Mac address is 00e0.fc00.00a1Press Ctrl+B to enter Boot Menu... 0Auto-booting...Booting from Flash...Decompress Image..........................................................................................................OK!Starting at 0x10000...User interface Con 0 is availablePress ENTER to get started.The above prompt information appears when the switch completes its bootsequence. Press Enter to begin configuring the switch.n The Switch 8800 Family provide abundant command views. For more informationabout the configuration commands and the Command Line Interface (CLI), see3Com Switch 8800 Family Routing Switches Operation Manual.