Installing the IntelliJack10Connecting Devices to the IntelliJackOnce the power source and the data source have been verified ingood working order and the IntelliJack has been installed andmounted, connect your networking devices (such as computers,printers, IP phones, cameras, etc.) to the IntelliJack.The IntelliJack has two ways to connect devices:1 RJ-45 Personal Area Network (PAN) Ports — any of the fourswitched ports on the bottom of the IntelliJack. All ports feature10/100 Mbps auto-negotiation, which configures the NJ205IntelliJack for 10 Mbps or 100 Mbps connections automatically.2 Pass-through port—a single pass-through port is providedthat allows an additional device to be connected to aseparate network segment through the same IntelliJack. Thedata or voice traffic that travels through the pass-throughport, passes through the IntelliJack without being switched.1234
