Windows NT Installation with Networking Installed 17Set Up the PC CardAfter the computer restarts, the 3Com 11 Mbps Wireless LAN Client Setupwindow opens, in which you specify the PC Card configuration.1 In the 3Com 11 Mbps Wireless LAN Client Setup window, select Typical andclick Next.The Typical comfiguration sets up the PC Card with the following default values:WLAN Service Area—Attach to any WLAN Service Area automaticallySecurity Setting—No security (Open system)If you want to customize the PC Card configuration (to add security, for example),select Custom. See “Custom Installation Options” for details on custom settings.For the fastest installation, it is recommended that you use the Typical settings.You can customize the configuration later as described in “Setting the WirelessClient Configuration”.2 In the Summary window, review the PC Card setup and click Finish.3 When prompted to run the Setup program, click OK.4 Run the Setup program:a From the Windows Start menu, select Run.b In the Run dialog box, enter a path to the Setup program on the 3Com CD. Forexample, d:\srsetup.exe.The 3Com 11 Mbps Wireless LAN Setup program starts.Install Utilities1 Read the Welcome page and click Next.2 Read the Software License Agreement and click Yes. (If you click No, theinstallation stops.)3 Select a destination folder for the software files and click Next.4 In the Setup Type window, select the type of installation for the software:Typical—Installs the software and documentation.Compact—Installs the software but not documentation.Custom—Allows you to choose the components to install.5 Follow the directions in the Select Program Folder window and click Next.6 In the Desktop Icon Option window, click Yes.7 In the next window, if the option to restart the computer appears, select it andclick Finish.If you had a service pack installed before setting up the PC Card, reinstall it andrestart the computer.This completes the basic installation. To confirm the installation, see “Confirmingthe Installation.”