3Com 5500G Getting Started Manual

Also see for 5500G SERIES: Product guide Configuration and Command Reference Guide

Contents

Installing the Linux System through an Ethernet Connection 29Figure 5 Network diagram for an Ethernet installation through Eth1Figure 6 Network diagram for Ethernet installation through the managementEthernet port Eth2Configuring the TFTPServerComplete the following configuration procedure on the TFTP server:1 Ensure that there is network connectivity between the TFTP server and theswitch installed with the OSN|M module.2 Enable TFTP on the TFTP server, and store the configuration file and theinstallation files listed in Table 8 on the TFTP server. (These files areSwitch with OAPTFTP ServerControllerGE 1/0 /2on switchGE 1/1 /2Eth1Consoleon OSN|MInternal connectionbetween the OSN|M and the switchIP networkDHCP ServerSwitch with OSN|MTFTP ServerControllerManagementEthernet port(Eth2) on OSN|MConsoleon OSN|MIP networkDHCP Server