3COM Security Switch 6200 Hardware and Software Users Guide 3-11Interface Connections and First Time Start-UpSNMP Communities================Community Address Netmask Accessmiddle 10.1.1.22 255.255.255.255 read-writeAdd the SNMP Communities N>[N]:7. Configure the individual user accounts.Accounts Configuration=======================This section allows you to change your “root” password.Additionally, you can set up accounts for users to loginto once the Interview is complete.Set 'root' Password or N>[Y]:Additional user accounts can be defined, each with itsown username and password.Add or Modify User Accounts or N>[Y]:Enter User Name []:Enter password:Verify password:Enable Login Access enabled>[disabled]:Enter Access Level Network Operator, ServiceOperator, Administrator>[Guest]:The following is an example display showing configured users.User Accounts=============Add or Modify User Accounts or N>[Y]: n8. Configure the host interfaces.Host Interfaces===============This section will help you configure interfaces on theHost. The system has two management ports, two GigaBitEthernet ports, and 16 10/100 ports.NOTE: At least one management port must be configuredon the system.User Name Login Access Access Leveladmin enabled Administratorfoobar enabled Guest
