3Com 6200 Hardware And Software Users Manual

Also see for 3CR13500: Software install guide

Contents

3COM Security Switch 6200 Hardware and Software Users Guide 4-9Configuring the Security Switch 6200 SystemSNMP Communities================Change the SNMP Communities Delete oreXit>[eXit]: aEnter Community Name []: publicEnter IP Source Addresses [0.0.0.0/32]: 10.0.0.0/8Enter Access Mode

read-write>[read-only]:SNMP Communities================Change the SNMP Communities Delete oreXit>[eXit]:5. Enter the desired option or enter X to return to SNMPConfiguration Menu.SNMP configuration==================1) SNMP Server2) Communities3) Trap DestinationsX) Exit6. Configure SNMP Trap Destinations. For example:Enter choice <1 - 3, X>[X]: 3SNMP Traps==========Change the SNMP Trap Destinations Delete, Modifyor eXit>[eXit]: aEnter Trap Destination [0.0.0.0]: 10.2.1.48Enter Port Number [162]:Enter Trap Type inform>[trap]:Enter SNMP Version SNMPv3>[SNMPv1]:Enter Community []: foobarCommunity Address Netmask Accessfoobar 10.2.1.48 255.255.255.255 read-writeCommunity Address Netmask Accessfoobar 10.2.1.48 255.255.255.255 read-writepublic 10.0.0.0 255.0.0.0 read-onlyDestination Port Type Version Community