Installing the Switch 9000 2-3Figure 2-1 Fitting the mounting bracket5 Repeat the three previous steps for the other side of the Switch.6 Refer to the instructions that shipped with your rack, runners, shelf ortray to complete the installation of the Switch into the mounting rack.CAUTION: When using rack mounting runners, a shelf, or a tray, makesure that the ventilation holes on the side of the Switch are notobstructed.7 Connect cables.Free-Standing The Switch 9000 is supplied with four self-adhesive rubber pads. Applythe pads to the underside of the device by sticking a pad in the markedarea at each corner of the Switch.
