Loading NetWare ODI Drivers 4-9b Remove the EISA configuration diskette and exit theprogram.c Restart the computer.12 Access the C:\NWCLIENT subdirectory.13 Edit the NET.CFG file, which is in the NWCLIENTsubdirectory, as follows:a In the LINK DRIVER 3C59X section of the NET.CFG file, addthe following:Slot 3FRAME ETHERNET_802.2b Repeat step 13a for the second adapter:Slot 5FRAME ETHERNET_IIThe slot numbers shown above are examples; yours maybe different.Each frame type must be different, as shown in the previousexamples. Refer to Novell’s DOS ODI client manual forinformation on the frame types to use.14 Reboot the computer.Finding the Adapter’s Slot NumberWhen working in a NetWare environment with multipleadapters in a client computer, you must know each adapter’sslot number. To find an adapter’s slot number after insertingthe adapters, follow these steps.1 Access the main menu on the EtherDisk diskette.a Boot the computer under DOS.b Insert the EtherDisk diskette in a floppy drive and makethat drive the active one.c At the prompt, type:INSTALL [Enter]The main menu appears.
