Installing the Network Drivers6-2Installing Drivers from theEtherDisk DisketteThe EtherDisk diskette contains files and drivers, a utilityprogram to automatically install some drivers, and softwaredriver directories that include NDIS and Novell® NetWaredrivers. If you used the AutoLink auto installation softwarefeature for a single ISA or EISA adapter under theconditions described in Chapters 2 and 3, NetWare DOSODI client driver installation was performed automatically,and no further installation procedures are necessary. If yoursituation does not meet the conditions required by the autoinstallation feature, follow the steps below to load theappropriate network driver.1. Make sure that you have installed and configuredthe adapter, and booted the computer underDOS.2. If the EtherDisk diskette is already in your floppydrive, go directly to step 7. Otherwise, insert theEtherDisk diskette in a floppy drive on yourcomputer.3. Make that drive the current drive.For example, if the diskette drive is A, type thefollowing command:A: [Enter]4. Type at the prompt:INSTALL [Enter]
