3Com Fast EtherLink XL PCI 10/100BASE-TX User Manual

Also see for Fast EtherLink XL PCI 10/100BASE-TX: Quick start guide

Contents

3Com Fast EtherLink XL PCI 10/100BASE-TX User Manual Manual pdf 27 page image

Windows NT 3-712 In the Network Settings window, click Close.If you are prompted for network information, enter theinformation supplied by your MIS department.Windows NT prompts you to reboot.13 Click Yes to restart your PC.The driver installation is complete.To confirm successful installation, double-click the Networkicon in the Control Panel. Click the Adapters tab. The3C905B-TX NIC should appear in the list. If it does notappear, see Chapter 4 for troubleshooting information.Windows NT Version 3.51If you already have the 3C905B-TX network driver andwant to update it, follow the instructions provided in thenext section.Updating the Network DriverTo update the driver, follow these steps:1 Install the 3C905B-TX NIC and connect it to thenetwork, as described in Chapter 2.2 Restart the PC and start Windows NT.3 In the Control Panel, double-click Network.4 Select the 3Com adapter and click Properties.5 Record the settings for the NIC resources.6 Click Cancel.7 Double-click Network again in the Control Panel.8 In the list of Network Software and Adapter Cards,select the 3Com adapter.9 Click Update.10 When prompted, enter the directory path (a:\), insertEtherDisk Diskette #2, and click OK.11 Click OK to close the Network dialog box andcomplete the process.