1-25RESET buttonA reset button is provided on the LSQ1MPUA0 for you to reset the card when necessary.Dedicated S7503E-S SRPU-LSQ1CGP24TSC0Applicable modelS7503E-STechnical specificationsTable 1-24 Technical specifications of the LSQ1CGP24TSC0Item SpecificationsCPU MIPS64, 400 MHzBoot ROM 512 KBFlash memory 64 MBDDR SDRAM 512 MBDimensions (H × W × D) 45 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.)Portsz One console port, used for local or remote configuration andmanagement of the switch through a dialup connectionz One 10/100Base-TX management portz Sixteen 1000Base-X-SFP/100Base-FX-SFP portsz Eight Combo ports, each of which consists of a10/100/1000Base-T port and an SFP port. The two portscomprising a Combo port cannot operate at the same time.For the pairings of the SFP ports and 10/100/1000Base-Tports, refer to Table 1-26.Power consumption 25 W to 45 WPanel and LEDsFigure 1-21 shows the front panel of the LSQ1CGP24TSC0.Figure 1-21 Front panel of the LSQ1CGP24TSC0（1） （2） （3） （4） （5） （6）（7）(1) 1000Base-X-SFP/100Base-FX-SFP ports (2) Combo ports(3) Console port(4) 10/100Base-TX management port and its LEDs(5) Power and fan tray status LEDs (6) LPU status LEDs(7) RESET buttonOn-board interfacesz SFP ports and Combo ports
