3Com OfficeConnect 3CRWE41196 User Manual

Also see for OfficeConnect 3CRWE41196: Datasheet

System Tools 49Select the Configuration tab to display the Configuration screen(Figure 35).Backup ConfigurationClick BACKUP to save the current Access Point configuration. You will beprompted to download and save a file to disk.Restore Configuration DataIf you want to reinstate the configuration settings previously saved to afile, press Browse to locate the backup file on your computer, and thenclick RESTORE to copy the data into the Access Point's memory.The password will remain unchanged.Reset to Factory DefaultIf you want to reset the settings on your Access Point to those that wereloaded at the factory, click RESET. You will lose all your configurationchanges. The Access Point reverts to a DHCP client and will thereforerestart requiring a new IP address. To communicate with the Access Pointyou may need to rerun the DISCOVERY software to find out the IPaddress of the Access Point. See Appendix A for more information. Youmay need to reconfigure and restart your computer to re-establishcommunication with the Access Point.Upgrade Figure 36 Upgrade ScreenThe Upgrade facility allows you to install on the Access Point any newreleases of system software that 3Com may make available. To install newsoftware, you first need to download the software from the 3Com