84Information to theUserIf this equipment does cause interference to radio or television reception,which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of thefollowing measures:■ Reorient the receiving antenna.■ Relocate the equipment with respect to the receiver.■ Move the equipment away from the receiver.■ Plug the equipment into a different outlet so that equipment andreceiver are on different branch circuits.■ Consult the dealer or an experienced radio/television technician forhelp.The user may find the following booklet prepared by the FederalCommunications Commission helpful:How to Identify and Resolve Radio-TV Interference ProblemsThis booklet is available from the U.S. Government Printing Office,Washington, DC 20402, Stock No. 004-000-00345-4. In order to meetFCC emissions limits, this equipment must be used only with cables whichcomply with IEEE 802.3.FCC Declaration ofConformityWe declare under our sole responsibility that theModel: Description:3CRWE41196 11Mbps Wireless Access Pointto which this declaration relates, is in conformity with the followingstandards or other normative documents:■ ANSI C63.4-1992 Methods of Measurement■ Federal Communications Commission 47 CFR Part 15, subpart B15.107 (a)Class B Conducted Limits15.109 (a)Class B Radiated Emissions Limits■ 15.107 (e)Class B Conducted Limits15.109 (g)Class B Radiated Emissions Limits