3Com Router 3030 Installation Manual

Also see for Router 3030: Release note Command reference guide Supplementary guide Manual Datasheet

Contents

3Com Router 3030 Installation Manual Manual pdf 9 page image

Router 3030 9System specificationsLEDsThere are eight LEDs on the cover. The following table explains their meaning.Port attributesThe Router 3030 provides one console port, four 10/100M Ethernet ports and oneADSL over POTS port. The following table describes the attributes of ADSL overPOTS port.Table 1 System specifications of Router 3030Item3030DescriptionPort 1 console port 1 ADSL over POTS (Annex A)Four 10/100M Ethernet port (LAN) Processor MPC859 50MhzSDRAM 64MB Flash Memory8MB Maximumpowerconsumption12WPower supply (external) Input rated voltage: 100-240V a.c.,50/60HzMaximum tollerance 90-264V a.c., 50/60Hz Current:0.5A~1AOutputVoltage: 12V d.c. Current:‘4A Dimensions (W x H x D)300mm (11.81in) X 180mm (7.1in) X45mm (1.77in) (Maximum dimensions,which are the highest arc points of theplastic panel.)Weight 1kgOperating temperature 0 to 40*C Operating humidity10 to 90% (noncondensing)Table 2 LEDs of Router 3030LED DescriptionLAN0/LAN1/LAN2/LAN3 OFF means that link is not set up.ON means that link has been set up. Blinking means that data is being sent from orreceived at the interface.ADSL ACT OFF means that no data is being sent from orreceived at the interface.Blinking means that data is being sentfrom or received at the interface.ADSL LNKOFF means ADSL is inactive. ON means ADSL is active.Blinking means the interface is beingtrained.SYSBlinking means that the system isproperly working.Always ON or OFF means that the system isincorrectly working.PWR OFF means that power is not being supplied.ON means that power is beingsupplied.