3Com SuperStack 3 Switch 4300 Getting Started Manual

Also see for SuperStack 3 4300: User guide Datasheet

Default Settings 17Default Settings Table 6 shows the default settings for the Switch 4300. If you initializethe Switch, it is returned to these defaults.Table 6 Default SettingsFeature Switch 4300Port Status EnabledPort Speed 10/100 Mbps ports are auto-negotiatedDuplex Mode All fixed 10BASE-T and 100BASE-TX ports areauto-negotiatingFlow Control Enabled in half duplex Auto-negotiating in full duplexBroadcast Storm Control Enabled (default threshold 3000 packets per second)Virtual LANs (VLANs) All ports belong to the untagged Default VLAN(VLAN 1) with 802.1Q learning operationalMulticast Filtering Filtering enabled until IGMP query is seen.Spanning Tree Protocol Enabled (Fast Start is enabled on all ports)BootP Enabled (default IP address is 0.0.0.0)Traffic Prioritization Two queues per portSwitch Database Empty Aging period 103 seconds17100ua.bk Page 17 Monday, March 12, 2001 11:18 AM