U SING RF AUTO -TUNINGWhat Is RFAuto-Tuning?RF Auto-Tuning is a technique you can use to configure your RF (radio)network. RF Auto-Tuning is a quick method that requires minimalconfiguration and no RF planning or site surveys, and instead, relies onthe AutoTune feature to set MAP channels and power settings.This is a great way to quickly install a WX switch and MAPs, and observehow the network operates. The RF Auto-Tuning technique is best suitedto networks containing fewer MAPs.To learn more about the benefits of RF Auto-Tuning, see “RFAuto-Tuning” on page 32.To use this technique:1 Physically place your equipment (WX switches and MAPs) in their desiredlocations.2 Configure initial WX switch connectivity (configure IP addresses).3 Upload the WX switch configuration into a 3WXM network plan.4 Create a service profile.5 Create a radio profile (or use the default radio profile).6 Map your service profile to your radio profile.7 Create your MAPs.8 Apply a radio profile to each radio on a MAP.9 Deploy your configuration.4
