3Com v6100 Installation Manual

Also see for V6100: User guide guide

3Com v6100 Installation Manual Manual pdf 43 page image

8 In the ‘FINISH’ screen (see Figure 19), the Next button is disabled. Complete theupgrade process by clicking Reset or Cancel. Click Reset, the V6100 ‘burns’ the newly loaded files to flash memory. The ‘Burningfiles to flash memory’ screen appears. Wait for the ‘burn’ to finish. When it finishes,the ‘End Process’ screen appears displaying the burned configuration files (seeFigure 20). Click Cancel, the V6100 resets, utilizing the files previously stored in flash memory.(Note that these are NOT the files you loaded in the previous Wizard steps).Figure 19 FINISH ScreenFigure 20 ‘End Process’ Screen9 Click the End Process button; the ‘Quick Setup’ screen appears and the full Webapplication is reactivated.Updating the Auxiliary FilesThe auxiliary files are configuration dat files that are loaded to the gateway (in addition to theini file) to enable enhanced gateway provisioning. The following common auxiliary files areavailable: CAS, Voice Prompts and Call Progress Tones (CPT). For information on additionalauxiliary files, refer to the V6100 Digital Gateway User Guide. Table 5 presents a briefdescription of the ini file and of each auxiliary file.V6100 Digital Gateway Installation Guide 43