3D Systems Touch User Manual
Also see for Touch: User guideUser guide
                       | |
Contents
| 
3D Systems, Inc.1530-0433 Rev. A6 APPENDIX B: ALTERNATE CONFIGURATIONSDual Unit ConfigurationThe haptic device may be configured in a dual unit setup. In this scenario, two units are connected upon beginningthe Smart Setup application.1. With two devices connected, select the Touch Smart Setup desktop icon to open the Touch Smart Setup application.2. When prompted, select both the Right and Left devices from the list.3. Insert the stylus for both devices into each inkwell for calibration.NOTE: Please refer to the Run 3D Systems Touch Smart Setup section for detailed calibration steps.4. Perform the Sphere Simulation and Hollow Cube tests on each device to verify proper performance.5. Select Save Configuration to complete the dual unit configuration process. |
Related manuals for 3D Systems Touch
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine