3M 2100 Service Manual
Also see for 2100: Illustrated parts breakdown
                              | |
Contents
| 
9/92How to remove and install the condenser lens (when equipped)Caution! Wear safety glasses when removing lens.1. Insert a Pin Punch or Drill Rod into the hole in the Tab (see illustration A)2. Release the lens by bending the Tab.3. Install the new lens and bend the Tab back into place.Caution! Do not overtighten the tab. The lens must have enough clearancefor expansion. There should be a .20 to .30 gap between the lens andlens bracket (Illustration B).Caution! Be careful not to scratch or chip the lens while installing.Illustration A Illustration B.020 Feeler Gage.020 to .030 Gap after installationTabMODEL 2100 OVERHEAD PROJECTOR6-3 |
Related manuals for 3M 2100
manualsdatabase
Your AI-powered manual search engine