3M Digital Projector S50 Operator's Manual

Also see for Multimedia Projector S50: Operator's guide User guide Quick start guide Specification sheet

Contents

3M Digital Projector S50 Operator's Manual Manual pdf 26 page image

PICTURE 1 MenuPICTURE 2 MenuWith the PICTURE 1 menu, the five items shown in the Tablebelow can be performed.Perform each operation in accordance with the instructions in theTable.With the PICTURE 2 menu, the five items shown in the Tablebelow can be performed.Perform each operation in accordance with the instructions in theTable.Item DescriptionCOLOR BAL R Adjust Red Color Balance: Dark LightCOLOR BAL B Adjust Blue Color Balance: Dark LightSHARPNESS Adjust Sharpness (for video/s-video): Clear SoftCOLOR Adjust COLOR (for video/s-video/component video):Dark LightTINT Adjust Tint (for video/s-video): Green RedPICTURE1 MenuItem DescriptionV POSITION Adjust Vertical Position (for rgb): Up DownH POSITION Adjust Horizontal Position (for rgb): Left RightH PHASEAdjust Horizontal Phase (for rgb/component video):Right Left• Adjust to eliminate flicker.H SIZEAdjust Horizontal Size (for rgb): Large Small• If the horizontal size adjustment is excessive, the image may not be displayedcorrectly. In such a case, initialize H SIZE with the RESET button.OVER SCANSelect Over-scan Ratio (for video/s-video/component video):LARGE MIDDLE SMALL• It is recommended to select SMALL to avoid flicker at the lower part of thepicture.25PICTURE2 MenuExample : PICTURE1 Menu(COLOR BAL R)Example : PICTURE2 Menu(V POSITION)MENU: SELECTMAINPICTURE-1PICTURE-2INPUTSCREENOPTIONCOLOR BAL RCOLOR BAL BSHARPNESSCOLORTINT12MENU: SELECTMAINPICTURE-1PICTURE-2INPUTSCREENOPTIONV POSITIONH POSITIONH PHASEH SIZEOVER SCAN12© 3M 2003. 3M™ Digital Projector S/X50