3M Digital Projector S50 Operator's Manual

Also see for Multimedia Projector S50: Operator's guide User guide Quick start guide Specification sheet

Contents

3M Digital Projector S50 Operator's Manual Manual pdf 30 page image

29You can use the remote control as a simplified mouse or keyboard.OPERATING THE PC SCREENCAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.• Only connect to a PC.• Before connecting, read the manuals of the device you will connect.• Do not unplug the connector cables while the computer is operating.• It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g.track balls), using this remote control. In this case, before connecting go into BIOS (system setup) andselect external mouse, and disable the pointing devices. In addition, the mouse may not function if thecomputer does not have the needed utility program. See your computer’s hardware manual for details.• The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible touse the remote control, depending on the computer’s configurations and mouse drivers.• The USB control can only be used for the functions listed above. You cannot do things like press two buttonsat once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).• This function is not available while the lamp is warming up (the power indicator flashes green), while adjusting the volume anddisplay, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.NOTESVIDEOASPECTHOMEEND MUTEPAGE DOWNKEYSTONEFREEZEOFFONMENUPOSITIONENTERESC RESETPAGE UP VOLUMEMAGNIFYAUTO BLANKRGB SEARCHSTANDBY/ONPS/2, ADB, Serial Mouse Control1. Turn off the projector and PC power, and connect the projector’scontrol terminal to the computer via the mouse cable.2. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB controlfunction is given priority, and mouse control from the control terminal will not function.3. Turn on the projector power, then the computer.The functions in the table below can be controlled. If you have difficulty with control,restart the computer (either from the software or by pressing the restart button).USB Mouse/Keyboard Control1. Connect the projector’s USB terminal to the computer using a USB cable.The functions in the table below can be controlled.Available Functions Remote Control OperationMove Pointer Use buttonsLeft click with mouse Press ENTER buttonRight click with mouse Press RESET buttonAvailable Functions Remote Control OperationMove Pointer Use buttonsLeft click with mouse Press ENTER buttonRight click with mouse Press RESET buttonPress keyboard’s HOME key Press HOME buttonPress keyboard’s END key Press END buttonPress keyboard’s PAGE UP key Press PAGE UP buttonPress keyboard’s PAGE DOWN key Press PAGE DOWN buttonPress keyboard’s ESC key Press ESC button© 3M 2003. 3M™ Digital Projector S/X50