3M HCD-1 Operating Instructions Manual

Contents

3M HCD-1 Operating Instructions Manual Manual pdf 10 page image

• While the touch screen panel is locked, you can dispense hot/cold water2. To unlock the panel,• A beep sounds once andthe panel is now unlocked.UV1. Tap the UV button• A beep sounds once and the UV indicator lights up, indicating that the UV lampis now switched on.• The UV lampHOW TO CUSTOMIZE WATER TEMPERATUREHow to Customize Hot Water TemperaturesThe default temperature for hot water is set at approximately 86The temperature for hot water can be customized between 831. Tap the Power button to switch off the dispenser.2. Tap and hold the Hot button for 3 seconds.• A beep sounds once and the Hot Water Temperature indicator3. Tap the Hot button again to raise the Hot Water Temperature indicator by 1 level each time.• The highest temperature for hot water is at 90• When the indicator is at level 4, tapping the Hot button will bring the Hot Water Temperature tolevel 0.4. After the temperature is set,settings to be saved automatically.5. Tap the Power button to switch on the dispenser and continue with use.How to Customize Cold Water TemperaturesThe default temperature for cold water is set at approximately 5.8The temperature for cold water can be customized between 5.01. Tap the Power button to switch off the dispenser.2. Tap and hold the Cold button for 3 seconds.• A beep sounds once and the Cold Water Temperature indicator3. Tap the Cold button again to raise the Cold Water Temperature indicator• The lowest temperature for cold water is at 5.010the touch screen panel is locked, you can dispense hot/cold waterTo unlock the panel, tap and hold the Auto Dispense button for three seconds.A beep sounds once and the Auto Dispense indicator turns off, indicating thatthe panel is now unlocked.Tap the UV button.A beep sounds once and the UV indicator lights up, indicating that the UV lampis now switched on.The UV lamp sterilizes the filtered water before sending it to the storage tank.HOW TO CUSTOMIZE WATER TEMPERATUREemperaturesThe default temperature for hot water is set at approximately 86oC.The temperature for hot water can be customized between 83oC (minimum) to 90oC (maximum).Tap the Power button to switch off the dispenser.button for 3 seconds.A beep sounds once and the Hot Water Temperature indicator (RED) blinks at level 2.Tap the Hot button again to raise the Hot Water Temperature indicator by 1 level each time.The highest temperature for hot water is at 90oC (level 4).n the indicator is at level 4, tapping the Hot button will bring the Hot Water Temperature totap the Power button to save the settings, or wait for 10 seconds for thesettings to be saved automatically.r button to switch on the dispenser and continue with use.How to Customize Cold Water Temperatureswater is set at approximately 5.8oC.The temperature for cold water can be customized between 5.0oC (minimum) to 7.0oC (maximum).Tap the Power button to switch off the dispenser.Tap and hold the Cold button for 3 seconds.A beep sounds once and the Cold Water Temperature indicator (BLUE) blinks at level 2.Tap the Cold button again to raise the Cold Water Temperature indicator by 1 level each time.The lowest temperature for cold water is at 5.0oC (level 4).the touch screen panel is locked, you can dispense hot/cold water.and hold the Auto Dispense button for three seconds.turns off, indicating thatA beep sounds once and the UV indicator lights up, indicating that the UV lampsterilizes the filtered water before sending it to the storage tank.C (maximum).blinks at level 2.Tap the Hot button again to raise the Hot Water Temperature indicator by 1 level each time.n the indicator is at level 4, tapping the Hot button will bring the Hot Water Temperature totap the Power button to save the settings, or wait for 10 seconds for theaximum).blinks at level 2.by 1 level each time.