3M HCD-1 Operating Instructions Manual
                | |
11• When the indicator is at level 4, tapping the Cold button will bring the Cold Water Temperature tolevel 0.4. After the temperature is set, tap the Power button to save the settings, or wait for 10 seconds for thesettings to be saved automatically.5. Tap the Power button to switch on the dispenser and continue with use.HOW TO CLEAN EXCESS WATER RECEIVER1. Remove the excess water receiver.2. Separate the grill from the excess waterreceiver.3. Drain all water from the receiver, and wipe thereceiver clean with soft cloth.4. Place the excess water receiver back in position. |
Related manuals for 3M HCD-1
3M HCD-2 Operating Instructions Manual
3M IL-IM-01 Installation & Operating Instructions Manual
3M HWS Series Installation And Operating Instructions Manual
3M MCWS075ME Installation And Operating Instructions Manual
3M DWS160-L Installation And Operating Instructions Manual
3M CWS Series Installation And Operating Instructions Manual
3M 3MWTS Series Installation And Operating Instructions Manual
3M Cuno CFS100WS Installation And Operating Instructions Manual
3M CFS1254 Installation And Operation Instructions Manual
3M Aqua-Pure AP200 Installation And Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine