3M MP7640i Operator's Manual
Also see for MP7640I: Product safety guideOperator's guideSpecificationsOperator's guide
                                     | |
Contents
| 
ENGLISH-8OPERATIONSOPERATIONSPower ON1. Check that the power cord is connected correctly.2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator lightsorange.3. Press the STANDBY/ON button on the control panel or the remote controller. Warm-upbegins and the POWER indicator blinks green.4. The POWER indicator ceases blinking and remains green when power is on. Open the slide lensdoor.5. Adjust picture size using the Zoom knob.6. Adjust focus using the Focus ring.Power OFF1. Press the STANDBY/ON button on the control panel or the remote controller. Then, themessage "Power off?" will appear on the screen,and the message will disappear by any operationor no operation for 5 seconds.During this messsage indication,press the STANDBY/ONbutton again. The projector lamp is extinguished and lamp cooling begins. The POWERindicator blinks orange during lamp cooling. Pressing the STANDBY/ON button has noeffect while the POWER indicator is blinking.2. The system assumes the Standby mode when cooling is complete, and the POWER indicatorceases blinking and changes to orange. Check that the indicator is orange and set the Powerswitch to [O].3. The POWER indicator is extinguished when power is off. Do not forget to close the lens door.• Except in emergencies, do not turn off unless the POWER indicator is orange as it willreduce the life of the projector lamp.• To prevent any troble, turn on/off the projector when the computer or video tape recorder is OFF.Providing a RS-232C cable is connected, turn on the computer before the projector.NOTEWARNING • Please read this manual, and the separate “SAFETYINSTRUCTIONS” thoroughly before using the equipment. Always ensure thatthe equipment is used safely.Power Switch Slide Lens doorSTANDBY/ON ButtonPOWER IndicatorVIDEOSTANDBY/ONKEYSTONEPOSITIONFREEZEMAGNIFY VOLUMEMENUSELECTRGBMENU RESETSTANDBY/ON ButtonZoom knobFocus ring |
Related manuals for 3M MP7640I
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine