3M MP7640i Operator's Manual

Also see for MP7640I: Product safety guide Operator's guide Specifications Operator's guide

3M MP7640i Operator's Manual Manual pdf 6 page image

ENGLISH-4BBBB EEEE FFFF OOOO RRRR EEEE UUUU SSSS EEEE (((( cccc oooo nnnn tttt iiii nnnn uuuu eeee dddd ))))Part Names (continued)VIDEOSTANDBY/ONKEYSTONEPOSITIONFREEZEMAGNIFY VOLUMEAUTOOFFBLANKMENUSELECTRGBMUTEMENU RESETSTANDBY/ON ButtonKEYSTONE ButtonButtonButtonButtonButtonMENU ButtonMAGNIFY ButtonMAGNIFY ButtonMAGNIFY ButtonAUTO ButtonBattery HolderOFFVIDEO ButtonRGB ButtonMENU SELECT ButtonPOSITION ButtonRESET ButtonVOLUME ButtonVOLUME ButtonFREEZE ButtonMUTE ButtonBLANK ButtonRemote ControllerLoading the BatteryFirst Loading:In original packing, the battery is installed in the battery holderof the remote control transmitter with protection filmPull out the protection film to activate the battery.Replacing:1. See the reverse side of the remote control transmitter.2. Press the grove in and pull out battery holder as shown to the right.3. Remove the old battery.4. Install the new battery (3V micro lithium battery type no.CR2025)with “+” side facing.5. Push in and click the battery holder.Pull out“+” sideBattery Holder(Refer to Page.8 "OPERATIONS")Replace the batteries when remote control transmitter operation becomes difficult.NOTECAUTION • Incorrect handling of the battery could result in fire or personal injury.Thebattery may explode if not handled properly. Be careful handling the battery.Follow the instructions in both the "Product Safety Guide" and this manual.• Use the 3V micro lithium battery type no.CR2025 only.• When loading the battery, make sure the plus and minus terminals are correctly oriented asindicated in the remote control transmitter.• When you dispose the battery, you should obey the law in the relative area or country.• Keep the battery away from children and pets.• When not to be used for an extended period, remove the battery from the remote controltransmitter.