3M Multimedia Projector X15i Operator's Manual

Also see for Multimedia Projector X15i: Brochure & specs Operator's guide Quick start guide Safety guide

3M Multimedia Projector X15i Operator's Manual Manual pdf 46 page image

46MaintenanceWARNING ŹDo not take care of the projector during use or immediately afteruse. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector. Before operating, make sure that the power switch isoff, that the power cord is not plugged in, and that the projector is cool adequately.Ź1HYHUWU\WRFDUHIRUWKHLQVLGHRIWKHSURMHFWRUSHUVRQDOO\'RLQJLVVRdangerous.Ź$YRLGZHWWLQJWKHSURMHFWRURULQVHUWLQJOLTXLGVLQWKHSURMHFWRU,WFRXOGUHVXOWLQD¿UHDQHOHFWULFVKRFNDQGRUPDOIXQFWLRQWRWKHSURMHFWRU• Don’t put a container containing water, cleaner or chemicals near theprojector.• Don’t use aerosols or sprays.CAUTION Ź3OHDVHWDNHULJKWFDUHRIWKHSURMHFWRUDFFRUGLQJWRWKHIROORZLQJ,QFRUUHFWFDUHFRXOGFDXVHQRWRQO\DQLQMXU\EXWDGYHUVHLQÀXHQFHsuch as discoloration, peeling paint, etc.• Do not use cleaner or chemicals other than those listed below.• Do not polish or wipe with hard objects.Inside of the projectorIn order to ensure the safe use of your projector, please have it cleaned andinspected by your dealer about once every year.Caring for the lens,IWKHOHQVLVÀDZHGVRLOHGRUIRJJHGLWFRXOGFDXVHGHWHULRUDWLRQRIGLVSOD\quality. Please take care of the lens, being cautious of the handling.1. Turn the projector off, and unplug the power cord. Allow the projector to coolVXI¿FLHQWO\2. After making sure that the projector is cool adequately, lightly wipe the lensZLWKDFRPPHUFLDOO\DYDLODEOHOHQVFOHDQLQJZLSH'RQRWWRXFKWKHOHQVdirectly with your hand.Caring for the cabinet and remote control,QFRUUHFWFDUHFRXOGKDYHDGYHUVHLQÀXHQFHVXFKDVGLVFRORUDWLRQSHHOLQJSDLQWetc.1. Turn the projector off, and unplug the power cord. Allow the projector to coolVXI¿FLHQWO\2. After making sure that the projector is cool adequately, lightly wipe with gauzeor a soft cloth.If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.Other care3M™ Digital Projector X15i© 3M 2006. All Rights Reserved.