3M Multimedia Projector X15i Operator's Manual

Also see for Multimedia Projector X15i: Brochure & specs Operator's guide Quick start guide Safety guide

3M Multimedia Projector X15i Operator's Manual Manual pdf 48 page image

48TroubleshootingRegarding the indicator lamps/LJKWLQJDQGÀDVKLQJRIWKH32:(5LQGLFDWRUWKH/$03LQGLFDWRUDQGWKH7(03indicator have the meanings as described in the table below. Please respondin accordance with the instructions within the table. If the same indication isdisplayed after the treatment, or if an indication other than the following isdisplayed, please contact your dealer or service company.POWERindicatorLAMPindicatorTEMPindicator DescriptionLightingIn OrangeTurnedoffTurnedoffThe projector is in a standby state.Please refer to the section “Power On/Off”. ( 17)BlinkingIn GreenTurnedoffTurnedoffThe projector is warming up.Please wait.LightingIn GreenTurnedoffTurnedoffThe projector is in an on state.Ordinary operations may be performed.BlinkingIn OrangeTurnedoffTurnedoffThe projector is cooling down.Please wait.BlinkingIn RedGLVFUHtionary)GLVFUHtionary)The projector is cooling down. A certain errorhas been detected.3OHDVHZDLWXQWLOWKH32:(5LQGLFDWRU¿QLVKHVEOLQNand then perform the proper response measure usingthe item descriptions below as reference.BlinkingIn RedorLightingIn RedLightingIn RedTurnedoffThe lamp does not light, and there is apossibility that interior portion has becomeheated.Please turn the power off, and allow the unit to cooldown at least 20 minutes. After the projector hasVXI¿FLHQWO\FRROHGGRZQSOHDVHPDNHFRQ¿UPDWLRQRIthe following items, and then turn the power on again.• Is there blockage of the air passage aperture?,VWKHDLU¿OWHUGLUW\"• Does the peripheral temperature exceed 35°C?If the same indication is displayed after the treatment,please change the lamp by referring to the section“Lamp”. ( 42)BlinkingIn RedorLightingIn RedBlinkingIn RedTurnedoff7KHODPSGRRUKDVQRWEHHQSURSHUO\¿[HG(attached).Please turn the power off, and allow the unit to cooldown at least 45 minutes. After the projector hasVXI¿FLHQWO\FRROHGGRZQSOHDVHPDNHFRQ¿UPDWLRQRIthe attachment state of the lamp door. After performingany needed maintenance, turn the power on again. Ifthe same indication is displayed after the treatment,please contact your dealer or service company.3M™ Digital Projector X15i© 3M 2006. All Rights Reserved.