3M X90 Network Function Manual

Also see for X90: Brochure & specs Application guide Specifications Operator's guide

3M X90 Network Function Manual Manual pdf 9 page image

9SettingsPort SettingsDisplays and configures communication port settings.Click the [Apply] button to save the settings.• The new configuration settings are activated after restarting thenetwork connection. The network connection must be restarted when theconfiguration settings are changed. The network connection can be restartedusing [Network Restart] on the main menu.dresses.NOTEItem DescriptionNetwork Control Port1(Port:23) Configures command control port 1 (Port:23).Port open Click the [Enable] check box to use port 23.Authentication Click the [Enable] check box when authentication is requiredfor this port.Network Control Port2(Port:9715) Configures command control port 2 (Port:9715).Port open Click the [Enable] check box to use port 9715.Authentication Click the [Enable] check box when authentication is requiredfor this port.Image Transfer Port(Port:9716) Configures the image transfer port (Port:9716).Port open Click the [Enable] check box to use port 9716.Authentication Click the [Enable] check box when authentication is requiredfor this port.SNMP Port Configures the SNMP port.Port open Click the [Enable] check box to use SNMP.Trap address Configures the destination of the SNMP Trap in IP format.SMTP Port Configures the SMTP port.Port open Click the [Enable] check box to use the e-mail function.3M™ Digital Projector X90© 3M 2007. All Rights Reserved.