Driver Installation Under Linux68 3ware 9000 Series Serial ATA RAID Controller Installation GuideDetermining the Current Version ofyour 3ware DriverIf you already have a 3ware controller installed, you can check thecurrent driver version.If you have a 2.4 kernel or earlier, type the following command:cat /proc/scsi/3w-9xxx/*where the asterisk (*) represents SCSI host ID and “9xxx”represents the family of the controller. For example:cat /proc/scsi/3w-9xxx/0If you have a 2.6 kernels with sysfs, type the following command:cat /sys/class/scsi_host//statswhere is usually host0, unless other SCSI devices areavailable, in which case it may be host1 or higher.If you have a 2.6 kernel without sysfs, type the followingcommand:dmesg | grep 3w(dmesg can also be used with earlier kernel versions.)Driver Installation Under Red HatLinuxMaterials Required 3ware software CD-ROM Floppy diskette, if you need to create a driver diskette. Red Hat Linux installation CD-ROM and boot disk. (Notrequired if Red Hat Linux is already installed on another drive.)
