Driver Installation Under Linux70 3ware 9000 Series Serial ATA RAID Controller Installation Guide1 Boot with the Red Hat CD or diskette:a Insert either the Red Hat CD-ROM disk or a Red Hat bootdiskette into your computer.b Start or reboot your computer.c When the Welcome to Red Hat display appears, typeexpert at the boot prompt.boot: expertA number of files will load and then a message will prompt youto insert your driver disk.2 Install the driver:Insert the driver diskette containing the 3ware driver for RedHat and press Enter.The system automatically reports:Loading 3w-9xxx driver3 When prompted, select the proper language and keyboard typesfor your locality.4 If asked for what type of media, select Local CD-ROM sinceyou are installing from the Red Hat CD-ROM.Installing the 3ware Driver on a Red HatLinux System that Boots From a Different DeviceThe steps for installing the 3ware driver vary slightly, depending onyour specific installation requirements. Select the appropriate set ofsteps below, based on whether: You want to update the RAM disk You prefer to load the driver manually or from a script, insteadof updating the RAM disk
