3Ware 9650SE-2LPB-10 - Sataii Raid Hardware 10Pk Cli Manual
Also see for 3WARE 9650SE: User guideUser guideGuideUser guide addendumSpecification
                                                                                                       | |
Contents
| 
Port Object Commandswww.3ware.com 81/cx/px remove [noscan] [quiet]This command allows you to remove (or export) a port (or drive) /cx/px.Exporting a port instructs the firmware to remove the specified port from itspool of managed ports, but does not retain the DCB (Disk ConfigurationBlock) metadata on the attached disk. You can import (or re-introduce) theport by rescanning the controller.noscan is used to not inform the operating system of this change. The defaultis to inform the operating system.quiet is for non-interactive mode./cx/px set identify=on|offThis command applies only to 9550SX, 9590SE, and 9650SE modelcontrollers.This command sets the LED status of the port to on or off. If identify is set toon, the firmware activates the setting of the corresponding LED of the port onthe controller and causes it to blink.Note: This command is equivalent to “/ex/slotx set identify=on|off” onpage 90.Example://localhost> /c0/p5 set identify=onSetting Port Identify on /c0/p5 to [on] ... Done.Warning: Use caution when using this command as this operation will degradeany redundant units. This command will fail if you attempt to remove a drive from anon-redundant unit. After the drive is removed in CLI it can be removed physically,without powering down the system if a hot swap carrier is available. System hangsand damage can occur if a hot swap carrier is not used.Note: This feature requires an enclosure that uses an integrated AMCC/3wareCCU (chassis control unit), such as the 3ware Sidecar, or a chassis from a third-party vendor. (Check the 3ware web site for a list of chassis vendors that supportenclosure services, as they become available.) For additional information aboutenclosure-related commands, see “Enclosure Object Commands” on page 87. |
Related manuals for 3Ware 3WARE 9650SE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine