4IPNET EAP210 User Manual
Also see for EAP210: Quick installation guideQuick installation guideUser manual
                                                                                                                                                                      | |
Contents
| 
User’s ManualEnterprise Access Point ENGLISHCopyright © 4IPNET, INC. All rights reserved. 1408.2 WirelessThis section is for configuring wireless settings for this system to associate with its uplink access point.8.2.1 General SettingsThis section is for manual configuration of the system RF settings. Manually enter the uplink ESSID toassociate with on this page. Security can be set on the “Security” tab to be discussed in section 8.2.3. Forautomatic configuration, use the ‘Site Survey’ tab (discussed in section 8.2.4) to search for the desired SSID. ESSID: The ESSID (Service Set ID) of the client device that the system is to be associated with. Transmit Power: The signal strength transmitted from the system. Select the Transmit Power Levelfrom the drop-down list box. Level 1 is the actual highest power, Level 2 is the highest power minus1dBm, so on and so forth. ACK Timeout: When packet loss is increasing over longer distance, ACK Timeout can be used toalleviate this issue. |
Related manuals for 4IPNET EAP210
manualsdatabase
Your AI-powered manual search engine