4IPNET EAP737 User Manual

Also see for EAP737: Quick installation guide

4IPNET EAP737 User Manual Manual pdf 17 page image

17User Manual ENGLISHEAP/OWL-Series Wave 2 Enterprise Access PointCopyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.3.4 ManagementVLAN for Management: When this is enabled, management traffic from the system will be tagged with aVLAN ID. In other words, administrators who need to access the WMI must send management traffic withthe same VLAN ID such as connecting to a specific VAP with the same VLAN ID. Enter a value between 1and 4094 for the VLAN ID if the option is enabled.SNMP Configuration: to obtain the system information remotely.- Enable/ Disable: Enable or Disable this function.- Community String: The community string is required when accessing the ManagementInformation Base (MIB) of the system. Read: Enter the community string to access the MIB withRead privilege. Write: Enter the community string to access the MIB with Write privilege.- Edit SNMPv3 User List: The system allows 5 SNMP Users with Read or Read & Write Access.Determine the Name and Authentication Password on the SNMP Account List.- Trap: When enabled, events on Cold Start, Interface UP & Down, and Association & Disassociationcan be reported to the assigned server.- Server IP Address: Enter the IP address of the assigned server that will receive the trap report.Syslog Level: Select the desired level of received events from the drop-down menu. “Debug” level is asdefault setting.Remote Syslog Server: When this function is enabled, specify an external SYSLOG server to receive SYSLOGmessages from the system remotely.- Enable/ Disable: Enable or Disable this function.- SYSLOG Server IP: The IP address of the Syslog server that will receive the reported events.- Server Port: The port number of the Syslog server.Management IP List: Enter source IP address/subnet of administrator PCs which are allowed to access theWMI of this AP. Anyone else that is not on this List will be denied for WMI access. The default entry0.0.0.0/0.0.0.0 means that administrators are allowed to access the WMI from anywhere.LED: To turn on or off the Status LED indicator on the AP.