User’s ManualWHG Controller / HSG Gateway ENGLISH87(System Status, Service Zone Status, Wireless Status, Access Control Status, andAssociated Client Status).Administrators may filter the AP List by selecting the desired AP Models. Check theAP Models under AP Type and click “Apply” to apply the filter.To add an AP or multiple APs, click the “Add” button. This is elaborated in Section7.2.2 AP Adding and Discovery.Options such as Enabling or Disabling an AP, applying Templates and Service Zonescan be done by checking the checkboxes on the left of the AP List and clicking therespective buttons. Details on AP Templates configuration are elaborated in Section7.2.3 Templates Configuration.Note that not all firmware versions are fully compatible with WHG’s AP Managementfeature. Check for compatibility under the “Status” column.7.2.2 AP Adding and DiscoveryConfiguration path: Main Menu >> Access Points >> Local Area AP Management>> AP List >> AddOnce all AP’s are properly connected, admin can then start adding them to themanagement list. This can be accomplished by clicking “Add” above the AP List. APs
