User’s ManualWHG Controller / HSG Gateway ENGLISH997.3.1. Adding an Access PointConfiguration path: Main Menu >> Access Points >> Wide Area AP Management>> AP List >> AddThe Adding page allows administrator to directly add a single Access Point to themanagement list regardless of its Status. Simply configure the device’s IP address,name and login credentials, set a SNMP community string and click the Applybutton.7.3.2. AP Discovery to find Multiple Access PointsConfiguration path: Main Menu >> Access Points >> Wide Area AP Management>> AP List >> AddWith the AP Discovery feature, administrator can scan for APs regardless of theirphysical location as long as their IP addresses can be reached. An IP scanningrange may be configured. Select the target Device Type, define the scan IP rangeand Admin Settings, then click “Discover”. After the discovery process, newly foundAP’s will be listed under Device Results where the administrator can specify theindividual APs Device Name and SNMP Community string. Select and click the Addbutton and the discovered APs will be added into List.
