AAS Ascent T1 Quick Start Manual
    |
1 Carefully unpack box.1 of 4START HERE2 Unlock and open front panel of unitfor access to internal components.QUICK START GUIDEWhat’s what?All the important componentslabeled for youReset ButtonFor performing hard resetSpeaker ConnectorSpeaker can be disconnected temporarilyif unit is intermittently beeping. This is usuallydue to a SIM card that is not yet activated.SIM CardIf you have your own SIM card, see page 4and follow the instructions entitled,Installing a Custom SIM Card.Antenna CableCamera Mounting LocationFor future camera kit or third-party cameraTerminal BlockFor wiring to gate operator or door openerWARNING!AUTOMATIC GATES CAN CAUSESERIOUS INJURY OR DEATH!ALWAYS CHECK that the GATE PATH ISCLEAR BEFORE OPERATING!Reversing or other safety devices shouldALWAYS BE USED!Continued on next page...Unit shown with front panel fully open.Internal wiring not shown for clarity.IMPORTANT!rAscent WILL NOT WORK until theactivation process is COMPLETE!Follow the Activation Guide or callSummit Control at (844) 259-8265 toactivate your unit.Please use all four screws whenmounting unit to a pedestal; leave the“hockey puck” antenna in place, even ifusing the extension; and seal any holesor gaps created in the enclosure.Failure to follow these instructionscan result in damage to the unit!CAUTION!We recommend mounting Ascent T1 on agooseneck pedestal with the included hardware.If using alternate mounting, the optionalAscent 10' Cable Extension (p/n 16-X-EXT)should be purchased. Follow the instructionsincluded with the extension before moving on.Failure to do so may result in no signal!IMPORTANT!r |
Related manuals for AAS Ascent T1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine