AAS Ascent X1 Quick Start Manual
Also see for Ascent X1: Installation and operating manualQuick start guide
    |
1 Carefully unpack box.1 of 4We recommend mounting Ascent on agooseneck pedestal with the included hardware.If using alternate mounting, the optionalAscent 10' Cable Extension (p/n 16-X-EXT)should be purchased. Follow the instructionsincluded with the extension before moving on.Failure to do so may result in no signal!IMPORTANT!rSTART HERE2 Unlock and open front panel of unitfor access to internal components.QUICK START GUIDEWhat’s what?All the important componentslabeled for you.Camera Mounting LocationFor future camera kit or third-party cameraConnection TerminalsFor wiring to all external devices includinggate operator or door openerPower TerminalsFor wiring to compatible AC/DC power sourceAntenna CableSIM CardIf you have your own SIM card, see page 4and follow the instructions entitled,Installing a Third-Party SIM Card.WARNING!AUTOMATIC GATES CAN CAUSESERIOUS INJURY OR DEATH!ALWAYS CHECK that the GATE PATH ISCLEAR BEFORE OPERATING!Reversing or other safety devices shouldALWAYS BE USED!Unit shown with front panel fully open.Internal wiring not shown for clarity.IMPORTANT!rAscent WILL NOT WORK until theactivation process is COMPLETE!Follow the Activation Guide or callSummit Control at (844) 259-8265 toactivate your unit.Continued on next page...Please use all four screws whenmounting unit to a pedestal; leave the“hockey puck” antenna in place, even ifusing the extension; and seal any holesor gaps created in the enclosure.Failure to follow these instructionscan result in damage to the unit!CAUTION! |
Related manuals for AAS Ascent X1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine